Personal Printers on ResNet

Purpose:

This article explains how to setup a printer on ResNet.

Requirements: 

  • Have a USB printer
  • Have a USB cable to connect to the printer

or

  • Have a ResNet registered printer
  • Have a properly configured switch 

USB Connection:

The easiest way to use a printer in the dorms is directly connecting the printer to your computer via a USB cable. Many computers will correctly detect the printer and automatically install the proper programs when plugged in. For printers that do not automatically do this, there will generally be a CD that comes packaged with the printer that you can run to install the necessary software and driers.

Wired Connection:

If your printer does not have a USB connection, but has an Ethernet port on the back, you can connect your printer using a wired connection. You will need an Ethernet cable (Cat-5 or higher is recommended) to connect your printer to your switch.

Connect and register a switch in your room. From there, connect your printer and computer to your switch via two of the numbered LAN slots on the switch. Your printer and computer will share a private network, allowing you to use your printer.

If you need any assistance, feel free to call the Service Desk at 541-737-8787.

Details

Article ID: 45771
Created
Thu 1/4/18 9:56 AM
Modified
Fri 1/5/18 9:56 AM